Cam bearing
| CAMSHAFTS,COMPONENTS & DRIVE GEARS | |
| DESCRIPTION | PART NUMBER |
| A-CAMSHAFT REGROUND 5 JOURNAL 1928,EXCHANGE ONLY | A-6250-AR |
| A-CAMSHAFT REGROUND 3 JOURNAL 1929-31,EXCHANGE ONLY | A-6250-B |
| A-CAMSHAFT REGROUND “B” GRIND ON AN “A” CORE, EXCHANGE ONLY | A-6250-B-A |
| A-CAMSHAFT-TOURING GRIND EXCHANGE ONLY 29-31 | A-6250-C |
| THIS CAMSHAFT HAS MORE POWER THAN THE A OR B GRINDS & GIVES EXCELLENT MILAGE. | |
| A-CAMSHAFT-TOURING GRIND, NEW CAMSHAFT NO EXCHANGE 29-31 | A-6250-C-S |
| THIS CAMSHAFT HAS MORE POWER THAN THE A OR B GRINDS & GIVES EXCELLENT MILAGE. | |
| B-CAMSHAFT-REGROUND MODEL B- EXCHANGE ONLY | B-6250 |
| SUPER TOURING CAMSHAFT EXCHANGE ONLY | A-6250-ST-S |
| THIS CAMSHAFT HAS MORE POWER THAN OUR TOURING CAMSHAFT. | |
| THIS CAMSHAFT IS TO BE USED WITH OVER 6-1 COMPRESSION & OVERSIZE INTAKE VALVES. | |
| SUPER TOURING CAMSHAFT, NEW CAMSHAFT, NO EXCHANGE | A-6250-ST-S |
| THIS CAMSHAFT HAS MORE POWER THAN OUR TOURING CAMSHAFT. | |
| THIS CAMSHAFT IS TO BE USED WITH OVER 6-1 COMPRESSION & OVERSIZE INTAKE VALVES. | |
| A-CAM BEARING SET | A-711-S |
| A-CAMSHAFT DOWEL PIN SET | A-6253 |
| A-CAMSHAFT GEAR FIBERGLASS, USE WITH A-6306 CRANK GEAR | A-6256-AF |
| A-CAMSHAFT GEAR ALUMINUM, USE WITH A-6306 CRANK GEAR | A-6256-AL |
| A-CAMSHAFT GEAR BRONZE, USE WITH A-6306-B CRANK GEAR | A-6256-B |
| A-CAMSHAFT NUT | A-6259-A |
| A-CAMSHAFT NUT, MODERN STYLE WITH HEX DRIVE & FLAT WASHER MADE ON TO COVER THE CAM DOWEL PINS. | A-6259-M |
| A-CAMSHAFT NUT WRENCH, USE WITH 1/2″ BREAKOVER BAR | A-6259-W |
| A-CAMSHAFT THRUST PLUNGER & SPRING | A-6275 |
| A-CRANKSHAFT GEAR, USE WITH FIBERGLASS CAM GEAR | A-6306 |
| A-CRANKSHAFT GEAR BILLIT STEEL, HEAT TREATED, USE WITH BRONZE CAM GEAR | A-6306-B |
Please contact US to assist in recommending the right Bearing for your application.